NaturePrint Paper...How it works!

1 Select FLAT objects you wish to print--weeds, leaves, keys, string, lace, a sliced shell, buttons, cutouts, paperclips, a black and white negative, etc...

2 Remove a sheet of paper. Pin at corners (blue side up) to a piece of corrugated cardboard for support.

3 Place objects to print on top of NaturePrint® Paper.
Note: very lightweight objects can be held in place by covering with plastic wrap or a piece of clear plastic in place of pins.

4 Expose to sun until blue paper turns very pale blue--about 2 minutes. Times will vary; do not overexpose.

5 After removing objects from paper, protect print from direct sun and soak in a container of plain water for about 1 minute. Dry flat. Image will sharpen during drying time. When dry, flatten under a heavy book.

HAVE FUN!

1	Select FLAT objects you wish to print--weeds, leaves, keys, string, lace, a sliced shell, buttons, cutouts, paperclips, a black and white negative, etc...
2	Remove a sheet of paper. Pin at corners (blue side up) to a piece of corrugated cardboard for support.
3	Place objects to print on top of NaturePrint® Paper. Note: very lightweight objects can be held in place by covering with plastic wrap or a piece of clear plastic in place of pins.
4	Expose to sun until blue paper turns very pale blue--about 2 minutes. Times will vary; do not overexpose.
5	After removing objects from paper, protect print from direct sun and soak in a container of plain water for about 1 minute. Dry flat. Image will sharpen during drying time. When dry, flatten under a heavy book.